MOLECULARLY IMPRINTED AZO-POLYMER AS STRATEGY IN THE DEVELOPING A NEW SENSORIAL PLATFORM FOR URIC ACID DETECTION
Keywords:
Electrochemical sensor; molecularly imprinted polymer; uric acid detection.Abstract
This present work was studied the development of a molecularly imprinted polymer (MIP) based on the polyazo-Bismarck Y) for detection of uric acid. The film MIP was electrodeposited on the fluorine-doped tin-oxide (FTO) glass electrode surface by electropolymerization of Bismark Brown Y monomer in presence of uric acid as the template molecule. The MIP-poly(azo-Bismark Y) sensor displays a good electrochemical response, high sensitivity and selectivity in specific binding of the uric acid. Under the optimized experimental conditions, the voltammetric response of the proposed sensor was linear in the concentration range of 0.20 mmol L-1 to 0.60 mmol L-1, with detection limit of 0.17 mmol L−1.
Downloads
Download data is not yet available.
References
AGHAEI, A.; MILANI HOSSEINI, M. R.; NAJAFI, M. A novel capacitive biosensor for cholesterol assay that uses an electropolymerized molecularly imprinted polymer. Electrochimica Acta, v. 55, n. 5, p. 1503–1508, 1 fev. 2010.
ALLENDER, C. J. et al. Pharmaceutical applications for molecularly imprinted polymers. International Journal of Pharmaceutics, v. 195, n. 1–2, p. 39–43, 2000.
ANDRÉ-BARRÈS, C. et al. Comparison of diffusivities data of streptocyanine dyes by electrochemical and NMR-DOSY methods. v. 686, p. 54–57, 2012.
BARROS, L. A.; CUSTODIO, R.; RATH, S. Design of a new molecularly imprinted polymer selective for hydrochlorothiazide based on theoretical predictions using Gibbs free energy. Journal of the Brazilian Chemical Society, v. 27, n. 12, p. 2300–2311, 2016.
BLACK, C. N. et al. Uric acid in major depressive and anxiety disorders. Journal of Affective Disorders, v. 225, n. March 2017, p. 684–690, 2018.
CÉSPEDES, F.; MARTÍNEZ-FÀBREGAS, E.; ALEGRET, S. New materials for electrochemical sensing I. Rigid conducting composites. TrAC - Trends in Analytical Chemistry, v. 15, n. 7, p. 296–304, 1996.
DEHGHANI, M.; NASIRIZADEH, N.; YAZDANSHENAS, M. E. Determination of cefixime using a novel electrochemical sensor produced with gold nanowires/graphene oxide/electropolymerized molecular imprinted polymer. Materials Science and Engineering C, v. 96, n. December 2018, p. 654–660, 2019.
EL-RAHMAN, H. A. A. et al. Oxidative polymerization of p-aminoazobenzene in acetonitrile. A new electroactive polymer. Journal of Electroanalytical Chemistry, v. 315, n. 1–2, p. 161–174, 1991.
HJELM, J. et al. Electropolymerisation dynamics of a highly conducting metallopolymer: Poly-[Os(4′-(5-(2,2′-bithienyl))-2,2′:6′, 2″-terpyridine)2]2+. Electrochemistry Communications, v. 6, n. 2, p. 193–200, 2004.
HOSU, O. et al. Nanostructured electropolymerized poly(methylene blue) films from deep eutectic solvents. Optimization and characterization. Electrochimica Acta, v. 232, p. 285–295, 2017.
HWANG, B. J.; SANTHANAM, R.; LIN, Y. L. Nucleation and growth mechanism of electroformation of polypyrrole on a heat-treated gold/highly oriented pyrolytic graphite. Electrochimica Acta, v. 46, n. 18, p. 2843–2853, 2001.
HWANG, D. et al. Analytica Chimica Acta Recent advances in electrochemical non-enzymatic glucose sensors e A review. Analytica Chimica Acta, v. 1033, p. 1–34, 2018.
KARIMIAN, N.; GHOLIVAND, M. B.; TAHERKHANI, F. Computational design and development of a novel voltammetric sensor for minoxidil detection based on electropolymerized molecularly imprinted polymer. Journal of Electroanalytical Chemistry, v. 740, p. 45–52, 2015.
LEVI, M. D. et al. Influence of ionic size on the mechanism of electrochemical doping of polypyrrole films studied by cyclic voltammetry. Electrochimica Acta, v. 42, n. 5, p. 757–769, 1997.
LI, X. G. et al. Novel multifunctional polymers from aromatic diamines by oxidative polymerizations. Chemical Reviews, v. 102, n. 9, p. 2925–3030, 2002.
MERINO, E.; RIBAGORDA, M. Control over molecular motion using the cis – trans photoisomerization of the azo group. 2012.
MOTIA, S. et al. Development of a novel electrochemical sensor based on electropolymerized molecularly imprinted polymer for selective detection of sodium lauryl sulfate in environmental waters and cosmetic products. Journal of Electroanalytical Chemistry, v. 823, n. March, p. 553–562, 2018.
MUCIO, M. et al. Sensors and Actuators B : Chemical Electrochemical sensor for dodecyl gallate determination based on electropolymerized molecularly imprinted polymer. Sensors & Actuators: B. Chemical, v. 253, p. 180–186, 2017.
OLEAN-OLIVEIRA, A.; TEIXEIRA, M. F. S. Sensors and Actuators B : Chemical Development of a nanocomposite chemiresistor sensor based on π - conjugated azo polymer and graphene blend for detection of dissolved oxygen. Sensors & Actuators: B. Chemical, v. 271, n. March, p. 353–357, 2018.
PAULING, B. Y. L. A Theory of the Structure and Process of Formation of Antibodies *. v. 372, n. 6, 1940.
PEREZ-RUIZ, F.; DALBETH, N.; BARDIN, T. A Review of Uric Acid, Crystal Deposition Disease, and GoutAdvances in Therapy, 2014.
REHAN, H. H. Electrosynthesis of conducting polymer films from the azo dye methoxy red. Journal of Applied Electrochemistry, v. 30, n. 8, p. 945–951, 2000.
SEQUOIA, E.; GENIES, E. M.; TSINTAVIS, C. Redox mechanism and electrochemical polyaniline deposits behayiour of. Polymer, v. 195, p. 109–128, 1985.
TALITA, L. et al. Síntese e caracterização de MIP com fenilalanina visando sua aplicação na técnica de SPE Synthesis and characterization of MIP with Phenylalanine for their application in SPE. v. 25, n. 6, p. 596–605, 2015.
TARLEY, C. R. T.; SOTOMAYOR, M. D. P. T.; KUBOTA, L. T. Polímeros biomiméticos em química analítica. Parte 1: preparo e aplicações de MIP ("Molecularly Imprinted Polymers") em técnicas de extração e separação. Química Nova, v. 28, n. 6, p. 1076–1086, 2005.
TEIXEIRA, M. F. S.; BARSAN, M. M.; BRETT, C. M. A. Molecular engineering of a π-conjugated polymer film of the azo dye Bismarck Brown Y. RSC Adv., v. 6, n. 103, p. 101318–101322, 2016a.
TEIXEIRA, M. F. S.; BARSAN, M. M.; BRETT, C. M. A. Molecular engineering of a pi-conjugated polymer film of the azo dye Bismarck Brown Y. RSC Adv., v. 6, n. 103, p. 101318, 2016b.
TORKASHVAND, M.; GHOLIVAND, M. B.; TAHERKHANI, F. Fabrication of an electrochemical sensor based on computationally designed molecularly imprinted polymer for the determination of mesalamine in real samples. Materials Science and Engineering C, v. 55, p. 209–217, 2015.
VOLKOV, A. et al. Electrochemical polymerization of aromatic amines. IR, XPS and PMT study of thin film formation on a Pt electrode. Journal of Electroanalytical Chemistry, v. 115, n. 2, p. 279–291, 1980.
YANG, Y. et al. Materials Science & Engineering C A photoresponsive surface molecularly imprinted polymer shell for determination of trace griseofulvin in milk. Materials Science & Engineering C, v. 92, n. July, p. 365–373, 2018.
YUAN, H. et al. Serum uric acid levels and risk of metabolic syndrome: A dose-response meta-analysis of prospective studies. Journal of Clinical Endocrinology and Metabolism, v. 100, n. 11, p. 4198–4207, 2015.
ZHENG, W. et al. Electrochemical sensor based on molecularly imprinted polymer / reduced graphene oxide composite for simultaneous determination of uric acid and tyrosine. Journal of Electroanalytical Chemistry, v. 813, n. January, p. 75–82, 2018.
ALLENDER, C. J. et al. Pharmaceutical applications for molecularly imprinted polymers. International Journal of Pharmaceutics, v. 195, n. 1–2, p. 39–43, 2000.
ANDRÉ-BARRÈS, C. et al. Comparison of diffusivities data of streptocyanine dyes by electrochemical and NMR-DOSY methods. v. 686, p. 54–57, 2012.
BARROS, L. A.; CUSTODIO, R.; RATH, S. Design of a new molecularly imprinted polymer selective for hydrochlorothiazide based on theoretical predictions using Gibbs free energy. Journal of the Brazilian Chemical Society, v. 27, n. 12, p. 2300–2311, 2016.
BLACK, C. N. et al. Uric acid in major depressive and anxiety disorders. Journal of Affective Disorders, v. 225, n. March 2017, p. 684–690, 2018.
CÉSPEDES, F.; MARTÍNEZ-FÀBREGAS, E.; ALEGRET, S. New materials for electrochemical sensing I. Rigid conducting composites. TrAC - Trends in Analytical Chemistry, v. 15, n. 7, p. 296–304, 1996.
DEHGHANI, M.; NASIRIZADEH, N.; YAZDANSHENAS, M. E. Determination of cefixime using a novel electrochemical sensor produced with gold nanowires/graphene oxide/electropolymerized molecular imprinted polymer. Materials Science and Engineering C, v. 96, n. December 2018, p. 654–660, 2019.
EL-RAHMAN, H. A. A. et al. Oxidative polymerization of p-aminoazobenzene in acetonitrile. A new electroactive polymer. Journal of Electroanalytical Chemistry, v. 315, n. 1–2, p. 161–174, 1991.
HJELM, J. et al. Electropolymerisation dynamics of a highly conducting metallopolymer: Poly-[Os(4′-(5-(2,2′-bithienyl))-2,2′:6′, 2″-terpyridine)2]2+. Electrochemistry Communications, v. 6, n. 2, p. 193–200, 2004.
HOSU, O. et al. Nanostructured electropolymerized poly(methylene blue) films from deep eutectic solvents. Optimization and characterization. Electrochimica Acta, v. 232, p. 285–295, 2017.
HWANG, B. J.; SANTHANAM, R.; LIN, Y. L. Nucleation and growth mechanism of electroformation of polypyrrole on a heat-treated gold/highly oriented pyrolytic graphite. Electrochimica Acta, v. 46, n. 18, p. 2843–2853, 2001.
HWANG, D. et al. Analytica Chimica Acta Recent advances in electrochemical non-enzymatic glucose sensors e A review. Analytica Chimica Acta, v. 1033, p. 1–34, 2018.
KARIMIAN, N.; GHOLIVAND, M. B.; TAHERKHANI, F. Computational design and development of a novel voltammetric sensor for minoxidil detection based on electropolymerized molecularly imprinted polymer. Journal of Electroanalytical Chemistry, v. 740, p. 45–52, 2015.
LEVI, M. D. et al. Influence of ionic size on the mechanism of electrochemical doping of polypyrrole films studied by cyclic voltammetry. Electrochimica Acta, v. 42, n. 5, p. 757–769, 1997.
LI, X. G. et al. Novel multifunctional polymers from aromatic diamines by oxidative polymerizations. Chemical Reviews, v. 102, n. 9, p. 2925–3030, 2002.
MERINO, E.; RIBAGORDA, M. Control over molecular motion using the cis – trans photoisomerization of the azo group. 2012.
MOTIA, S. et al. Development of a novel electrochemical sensor based on electropolymerized molecularly imprinted polymer for selective detection of sodium lauryl sulfate in environmental waters and cosmetic products. Journal of Electroanalytical Chemistry, v. 823, n. March, p. 553–562, 2018.
MUCIO, M. et al. Sensors and Actuators B : Chemical Electrochemical sensor for dodecyl gallate determination based on electropolymerized molecularly imprinted polymer. Sensors & Actuators: B. Chemical, v. 253, p. 180–186, 2017.
OLEAN-OLIVEIRA, A.; TEIXEIRA, M. F. S. Sensors and Actuators B : Chemical Development of a nanocomposite chemiresistor sensor based on π - conjugated azo polymer and graphene blend for detection of dissolved oxygen. Sensors & Actuators: B. Chemical, v. 271, n. March, p. 353–357, 2018.
PAULING, B. Y. L. A Theory of the Structure and Process of Formation of Antibodies *. v. 372, n. 6, 1940.
PEREZ-RUIZ, F.; DALBETH, N.; BARDIN, T. A Review of Uric Acid, Crystal Deposition Disease, and GoutAdvances in Therapy, 2014.
REHAN, H. H. Electrosynthesis of conducting polymer films from the azo dye methoxy red. Journal of Applied Electrochemistry, v. 30, n. 8, p. 945–951, 2000.
SEQUOIA, E.; GENIES, E. M.; TSINTAVIS, C. Redox mechanism and electrochemical polyaniline deposits behayiour of. Polymer, v. 195, p. 109–128, 1985.
TALITA, L. et al. Síntese e caracterização de MIP com fenilalanina visando sua aplicação na técnica de SPE Synthesis and characterization of MIP with Phenylalanine for their application in SPE. v. 25, n. 6, p. 596–605, 2015.
TARLEY, C. R. T.; SOTOMAYOR, M. D. P. T.; KUBOTA, L. T. Polímeros biomiméticos em química analítica. Parte 1: preparo e aplicações de MIP ("Molecularly Imprinted Polymers") em técnicas de extração e separação. Química Nova, v. 28, n. 6, p. 1076–1086, 2005.
TEIXEIRA, M. F. S.; BARSAN, M. M.; BRETT, C. M. A. Molecular engineering of a π-conjugated polymer film of the azo dye Bismarck Brown Y. RSC Adv., v. 6, n. 103, p. 101318–101322, 2016a.
TEIXEIRA, M. F. S.; BARSAN, M. M.; BRETT, C. M. A. Molecular engineering of a pi-conjugated polymer film of the azo dye Bismarck Brown Y. RSC Adv., v. 6, n. 103, p. 101318, 2016b.
TORKASHVAND, M.; GHOLIVAND, M. B.; TAHERKHANI, F. Fabrication of an electrochemical sensor based on computationally designed molecularly imprinted polymer for the determination of mesalamine in real samples. Materials Science and Engineering C, v. 55, p. 209–217, 2015.
VOLKOV, A. et al. Electrochemical polymerization of aromatic amines. IR, XPS and PMT study of thin film formation on a Pt electrode. Journal of Electroanalytical Chemistry, v. 115, n. 2, p. 279–291, 1980.
YANG, Y. et al. Materials Science & Engineering C A photoresponsive surface molecularly imprinted polymer shell for determination of trace griseofulvin in milk. Materials Science & Engineering C, v. 92, n. July, p. 365–373, 2018.
YUAN, H. et al. Serum uric acid levels and risk of metabolic syndrome: A dose-response meta-analysis of prospective studies. Journal of Clinical Endocrinology and Metabolism, v. 100, n. 11, p. 4198–4207, 2015.
ZHENG, W. et al. Electrochemical sensor based on molecularly imprinted polymer / reduced graphene oxide composite for simultaneous determination of uric acid and tyrosine. Journal of Electroanalytical Chemistry, v. 813, n. January, p. 75–82, 2018.
Downloads
Published
2019-10-29
Issue
Section
Artigo Científico Original
How to Cite
MOLECULARLY IMPRINTED AZO-POLYMER AS STRATEGY IN THE DEVELOPING A NEW SENSORIAL PLATFORM FOR URIC ACID DETECTION. (2019). Colloquium Exactarum. ISSN: 2178-8332, 11(3), 63-74. https://journal.unoeste.br/index.php/ce/article/view/3261